A Runbo CNC cutter for flexible materials is a precise electromechanical machine. It is a control cabinet and a precise mechanism. It has to be looked after, or faults show up and the working life gets shorter.
What to watch
1. Put the cutter somewhere sensible. Strong sun on the table can crack the surface and shorten its life.
2. Wipe the table with alcohol from time to time so the vacuum holes do not clog. Do not pour alcohol onto the table.
3. Do not leave heavy objects, scissors or other tools on the machine. They can meet the head when it starts.
4. Do not load the rails or the beam at either side of the table. The rails are easy to damage.
5. Do not pull a cable out by the wire alone. Do not unplug a data cable while the power is on. That can damage the machine or the computer.
6. Power: 220 V or 380 V, ±10 percent, 50 Hz. The AC supply needs a ground, to deal with static.
7. Maintain the computer, clear it up and check it for malware. An unstable PC also stops the machine running properly.
9. While the machine is moving, keep your head and hands away from the beam and the head.
10. A packed computer cutting system should not be badly shaken or struck in transit.
11. If there is a loud noise or the motion jams, switch the power off at once, do not keep using it, and contact the supplier.
12. When the cutter is finished for the day, put the dust cover on so dust stays out of the machine.