1. Acrylic sheet. Many colours. Used for acrylic letters, display panels, craft pieces, desk signs and display stands.
2. KT board. Display, decoration and the backing board behind exhibition graphics and notices. It blisters, so it is a poor choice for long display.
3. PVC foam board, also called Chevron board. Harder, so it breaks and blisters less. Used for longer-lasting panels, tent cards, hang tags, exhibition boards, painted three-dimensional letters and mounted graphics.
4. Paper board with an adhesive face. It stays flat and does not blister, for indoor signs that stay up for a while. The paper face cannot get wet.
5. Repositionable self-adhesive. A better grade, for glass, walls and similar surfaces, and it does not let go on its own.
6. Photo paper. No adhesive on the back, thicker sheet, a sharper print. Portraits, posters and hanging flags when the picture has to be clean.
7. Backlit film. A smooth surface and high resolution, for lightboxes lit from inside.
8. Vehicle wrap. Outdoor wrap holds, resists sunlight and keeps its colour. There are domestic and imported films, with black, white or grey backing. The same films are also used on glass, walls and outdoor billboards.
9. Lightbox fabric. Large sites, shop fascias, banners, lightboxes and truss backdrops. It is inexpensive. Shops usually keep both front-lit and back-lit cloth.
10. Clear self-adhesive. Transparent and resistant to sun, for logos and bumper strips on glass and shop windows.
A Runbo CNC cutter takes these jobs off the hand knife and shortens the time they take.